#labtron

Benchtop Multi-Parameter Water Quality Meter LMPWM-A30 Labtron Benchtop Multi-Parameter Water Quality Meter measures pH, conductivity, and TDS for comprehensive water analysis. Multiple measurement modes support diverse testing needs. Stores up to 500 data sets with calibration reminder to maintain consistent measurement accuracy. #LabEquipment #WaterTestingEquipment #Labtron https://www.labtron.com/benchtop-multi-parameter-water-quality-meter/lmpwm-a30

Benchtop Gloss Metrt LBGM-A11 - Digital Gloss Meter Benchtop Gloss Meter features a testing time of 0.5 s,providing rapid gloss assessment with accurate surface evaluation. It includes a calibration plate to provide a standard reference surface for verifying and adjusting the device's accuracy. The system is integrated with triple angle measurement mode, maintaining gloss on different surface types. #LabEquipment #GlossMeter #Labtron https://www.labtron.com/gloss-meter/lbgm-a11

Bench top Turbidity Meter LTM-C12 - Benchtop Turbidimeter Labtron Benchtop turbidity meter offers a measuring range from 0 to 500 NTU with a minimum readout value of 0.01 NTU. It delivers highly accurate results with advanced numerical calculations. This instrument supports quick and automatic multi-point calibration. It provides high throughput stability for accurate readings https://www.labtron.com/turbidity-meter/ltm-c12 #LabEquipment #TurbidityMeter #Labtron

Flame Photometer LFP-A40 - Digital Flame Photometer Labtron Flame Photometer measures K, Na, Li, Ca and Ba with 5 channels and direct concentration display on a 7-inch color touch screen. It provides less than 8 s response time, less than 3 percent drift and sample uptake below 3 ml per min. Includes USB interface, flameout protection device and air compressor. #LabEquipment #FlamePhotometer #Labtron https://www.labtron.com/flame-photometer/lfp-a40

Benchtop Turbidity Meter LTM-B12 - Benchtop Turbidimeter Labtron BenchTop Turbidity Meter uses a microprocessor-controlled 90° scattered light principle to measure turbidity in NTU. Complies with ISO 7027 using formazine standards for calibrated analysis. Designed to meet GLP requirements with precise calculations for water quality testing. #LabEquipment #TurbidityMeter #Labtron https://www.labtron.com/turbidity-meter/ltm-b12

Platelet Incubator LPTI-A12 - Blood Incubator Labtron Platelet Incubator maintains a 20 to 24 degree C temperature range with continuous agitation to keep platelets suspended. Real time automatic temperature logging supports monitoring and record keeping. It is suitable for storing platelets, reagents, and laboratory materials under controlled conditions. #LabEquipment #Incubator #Labtron https://www.labtron.com/platelet-incubator/lpti-a12

15 L Flammable Storage Cabinet LFSC-B10 - Flammable Safety Cabinet Labtron 15 L Flammable Storage Cabinet features dual walls with 38 mm insulating air space for fire resistance. Three-point latch with manual lock enhances security, while adjustable shelf and flame-arrester vents support safe liquid storage. Spill-catching shelves help contain accidental drips. #LabEquipment #FlammableCabinets #Labtron https://www.labtron.com/flammable-cabinets/lfsc-b10

ELISA Analyzer LELISA-A11 - Automated Immunoassay Analyzer Labtron ELISA Analyzer features 8 channel photometric reader with a 340 to 750 nm range and 0.000 to 3.000 A measurement. It offers air displacement pipetting 5 to 800 uL, 96-well processing, washing system, and incubator up to 60 C. USB and RS232 interface with Windows software supports automated workflow. #LabEquipment #ImmunoassayAnalyzer #Labtron https://www.labtron.com/elisa-analyzer/lelisa-a11

Microplate Reader LMPR-A10 - Plate Reader Labtron Microplate Reader operates at 400–750 nm with a 96-well plate for high-throughput biological analysis. Bichromatic multi-channel optics enhance sensitivity and measurement precision. Linear shaking with three speed settings supports controlled mixing and both qualitative and quantitative evaluation. #LabEquipment #AnalyticalEquipment #Labtron https://www.labtron.com/microplate-reader/lmpr-a10

Ductless Fume Hood LFH-A21 - Chemical Fume Hood Labtron Ductless Fume Hood has a 1110 x 690 x 740 mm chamber with 0.25 to 0.35 m per s air velocity and 105 m3 per h airflow. It includes two chemical filters, a UV lamp at 253.7 nm, an LCD control, and a centrifugal blower. An acrylic window and a phenolic resin worktable ensure safe handling. #LabEquipment #LaboratoryFumeHood #Labtron https://www.labtron.com/ductless-fume-hood/lfh-a21

-25°C Upright Freezer LUF-A11 - upright c Labtron -25°C Upright Freezer offers 358 L capacity with a −10°C to −25°C range under microprocessor control. Dual chambers with independent compressors enable separate temperature management and manual defrost. Coated cold-rolled steel interior and exterior support hygienic, corrosion-resistant storage. #LabEquipment #LaboratoryFreezers #Labtron https://www.labtron.com/25c-upright-freezers/luf-a11

Pharmacy Refrigerator LPRF-A21 - Lab Refrigerator Labtron Pharmacy Refrigerator offers 260 L capacity with a microcomputer digital controller for precise temperature control. It operates within 2 ℃ to 8℃ and 15℃ using an efficient compressor and fan system. An external digital display with high and low temperature alarm supports monitored pharmaceutical storage. #LabEquipment #PharmaceuticalRefrigerator #Labtron https://www.labtron.com/pharmacy-refrigerator/lprf-a21

Plant Nutrition Analyzer LPNA-A10 -Plant Nutrition Tester Labtron Plant Nutrition Analyzer measures thickness up to 1.2 mm for thin sample analysis. A digital touchscreen enables real time data viewing with integrated storage for record access. Built in GPS records location specific data and supports synchronized data sharing across operations. #LabEquipment #CholorophyllMeter #Labtron https://www.labtron.com/plant-nutrition-analyzer/lpna-a10

Ducted Fume Hood LFH-B11 - Fume Hood Labtron Ducted Fume Hood has 950 × 750 × 1150 mm workspace with 0.3–0.8 m³/s suction and 600–1200 m³/h airflow. Epoxy-coated steel body, acid-resistant lining, 12.7 mm worktop, LED lighting, universal socket, and tempered glass window ensure safe and stable operation. #LabEquipment #LaboratoryFumeHood #Labtron https://www.labtron.com/ducted-fume-hood/lfh-b11

Micro Centrifuge LMC-A10 - High Speed Centrifuge Labtron Micro Centrifuge delivers 15,000 rpm and 21,380×g RCF with digital speed and RCF control. It features a brushless DC motor, sealed aluminum rotor, magnetic door lock, and imbalance detection. Operates from -20℃ to 40℃ with auto precooling, ≤56 dB noise, and supports multiple tube sizes. #LabEquipment #LaboratoryCentrifuge #Labtron https://www.labtron.com/micro-centrifuge/lmc-a10

Dual-Range Temperature Thermostat LDRT-E13 - Laboratory Temperature Thermostat Labtron Dual Range Temperature Thermostat offers 20 L capacity with a −40 ℃ to 200 ℃ range and ± 0.05 ℃ fluctuation. It includes a 13 L/min circulating pump with energy-efficient high-speed cooling. Transparent lid, over-temperature protection, and power recovery aid stable use. #LabEquipment #BathsAndCirculators #Labtron https://www.labtron.com/dual-range-temperature-thermostat/ldrt-e13

Fat Analyzer LSFA-B10 - Soxhlet Analyzer Labtron Fat Analyzer operates on the Soxhlet extraction principle with automated processing. It handles six samples per batch with a 0.5 to 15 g capacity and uses a metal heating module with low power consumption. Ether leak detection with water temperature and flow control supports safe operation. #LabEquipment #FatAnalysisMachine #Labtron https://www.labtron.com/fat-analyzer/lsfa-b10

Solar Simulator LSS-A10 - Solar Panel Simulator Labtron Solar Simulator operates at 300 W with an A+A+A+ xenon light source, adjustable from 150–300 W. An integrated bulb–reflector design supports efficient light use, while heat dissipation modules allow lamp operation up to 6000 hours. #LabEquipment #SolarCellSimulator #Labtron https://www.labtron.com/solar-simulator/lss-a10

UV-VIS NIR Spectrophotometer LUVS-A10 - Lab Spectrophotometer Labtron UV VIS NIR Spectrophotometer covers a 190 to 3200 nm range for extended spectral analysis. Its double-beam optical system minimizes background interference, while integrated software enables automatic parameter measurement. USB 2.0 connectivity supports smooth data transfer for glass and material testing. #LabEquipment #Spectrophotometer #Labtron https://www.labtron.com/uv-vis-nir-spectrophotometer/luvs-a10

Automated Kinematic Viscometer LKV-A19 - Automatic Oil Viscosity Tester Labtron Automated Kinematic Viscometer features 12 position auto sampler and a modified Ubbelohde tube for a 0.5 to 10000 mm²/s range. It provides 20℃ to 100℃ control with ±0.01℃ accuracy and 0.02 s timing precision. Includes silicone bath, sample preheating to 95℃, RS232 ports, and built-in safety protections. #LabEquipment #KinematicViscometer #Labtron https://www.labtron.com/kinematic-viscometer/lkv-a19